Frequently asked questions about tuning the Daiwa 25 Alphas BF TW
Which spool bearings fit the Daiwa 25 Alphas BF TW?
The Daiwa 25 Alphas BF TW uses spool bearings in 3x6x2.5 (both spool bearings the same size) (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts. To swap them on this reel you need a Pin Remover, because the bearings are secured to the shaft with pins.
Which bearing class do we recommend for the 25 Alphas BF TW?
For the Daiwa 25 Alphas BF TW we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 25 Alphas BF TW?
The handle fitting of the Daiwa 25 Alphas BF TW is 8x5 (wrench size × shaft diameter in mm). Every tuning handle with a 8x5 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Do I need special tools to change the bearings on the 25 Alphas BF TW?
Yes. On the Daiwa 25 Alphas BF TW the spool bearings are secured to the spool shaft with pins. A Pin Remover lets you pull the pins out cleanly without bending the shaft. Apart from that you only need a suitable screwdriver for the side plate.
Can you install the tuning on my 25 Alphas BF TW?
Yes. Send us your Daiwa 25 Alphas BF TW, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.