Dein Warenkorb (0)
Dein Warenkorb ist leer
Steuern sind enthalten, Versandkosten werden an der Kasse berechnet.
Dein Warenkorb ist leer
Steuern sind enthalten, Versandkosten werden an der Kasse berechnet.
Shimano:
Daiwa:
Our knobs are compatible with many baitcaster reels from Shimano and Daiwa that have a Type A or Type S knob mount.
In the following list, you will find a selection of common reel models.
Your Reel is not listed? No problem – in the tab "Your Reel is not listed?" we show you how to check yourself if the knobs fit your reel.
Don't worry – if your reel is not on the compatibility list, that doesn't necessarily mean our knobs won't fit. Many manufacturers use the same knob mounts across several model generations.
With a few simple steps, you can check yourself whether our knobs fit your fishing reel.
First, take a closer look at the handle knob of your reel. On most reels, there is a small cap on top of the knob.
This cap can usually be carefully removed:
Under this cap, you will usually find the screw that attaches the knob to the handle.
Now it gets interesting. Under the cap, you will see either:
Riveted knobs are usually found only on very inexpensive reels and generally cannot be easily replaced.
If there is a screw, you can simply loosen it with a small screwdriver. Then the knob can be pulled off the handle.
Now measure the shaft of the handle where the knob sits.
For our knobs, the dimensions should be approximately:
If these dimensions fit, you can usually install our knobs without any problems.
Here you can see exactly where to measure.

The right crank knob (knob) significantly influences the grip feel, control, and comfort while fishing. Depending on the fishing technique, reel size, and personal preference, a different knob may be more suitable.
Knob size is usually specified by the diameter at the thickest point – not by the length. This diameter determines how much contact area your hand has with the knob.
Typical use: BFS, finesse, ultralight baitcasters
Typical use: allround baitcasters, zander, perch, pike
Typical use: pike, larger lures, stronger reels
Typical use: bigbait, large swimbaits, saltwater
Basically, larger knobs can also be mounted on smaller reels as long as the fitting matches. Technically, this is often possible.
However, you should pay attention to choosing a knob size that makes sense for the reel. A very large or heavy knob can significantly accelerate the crank due to its own weight and the resulting centrifugal force, more than some light reels are designed for.
Especially with very light baitcaster reels, BFS reels, or finely built gearboxes, a knob that is too large can increase the load on the mechanism. In the worst case, this can lead to more wear or even damage to the gearbox over time.
Therefore: just because a knob can be mounted does not automatically make it the best choice for the respective setup. For small and light reels, it is advisable to opt for light and appropriately sized knobs.
Here is a quick guide to which size fits which setup:
Ultimately, choosing the right knob is always a matter of personal grip feel. Many anglers prefer larger knobs for more comfort, while smaller knobs offer more direct feedback from the reel.
The crank knob made of EVA in the slim version fits any fishing Reel, whether Baitcaster or spinning Reel.
Black is beautiful, the elegant black of the EVA knob matches most fishing combos. To give your fishing gear the finishing touch, the EVA knobs come in various color combinations.
This way, you can color-coordinate the knobs with your fishing Reel and rod.
EVA is indispensable in fishing, as it has many properties that we fishing enthusiasts appreciate, e.g., the feel – EVA feels comfortable in every situation.
Whether it’s wet or cold, we always have a firm grip and control over the fishing Reel.
Details
The crank knobs are best suited for Reel sizes between 500 - 3000 but can also be fitted on larger models.
If you are unsure about the size, you can ask us for advice , we are happy to help you choose the right one.
If your Reel is not listed, don’t panic; for Reels of different brands, the original crank knob must first be removed and the shaft measured. If the shaft measurements match the specifications in the graphic, the knob is compatible.

Please note, each package contains 1x knob.
To ensure the knob fits a wide range of fishing reels, the package includes different washers.
This makes this knob fit almost every reel from Daiwa and Shimano.
In the The package does not include 7*4*2.5 mm bearings, you can order these separately from us or use the bearings from your original knob if available.