16 Caius A
Shimano2016

Shimano 16 Caius A Tuning

Tuning Specs
Handle bore 7x4
Spool bearing sizes 3x10x4 | 3x10x4
Recommended bearing class Apex
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended knob sizes
18–20 mm21–24 mm25–27 mm
Recommended handle lengths
90–105 mm
Let’s tune your reel
Available variants
150 R
151 L

Matching tuning parts for your Caius

There are currently no compatible tuning parts listed for this reel.

The Shimano 16 Caius (A-Generation) is an entry-level baitcasting reel with a compact body, S3D aluminum spool, and VBS brake. Available as 150 (right-handed) and 151 (left-handed), gear ratio 6.3:1.

Frequently asked questions about tuning the Shimano 16 Caius A

Which spool bearings fit the Shimano 16 Caius A?
The Shimano 16 Caius A uses spool bearings in 3x10x4 (both spool bearings the same size) (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts.
Which bearing class do we recommend for the 16 Caius A?
For the Shimano 16 Caius A we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 16 Caius A?
The handle fitting of the Shimano 16 Caius A is 7x4 (wrench size × shaft diameter in mm). Every tuning handle with a 7x4 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Can you install the tuning on my 16 Caius A?
Yes. Send us your Shimano 16 Caius A, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.