05 Cardiff 300 A
Shimano2005

Shimano 05 Cardiff 300 A Tuning

Tuning Specs
Handle bore 7x4
Spool bearing sizes 3x10x4 | 3x10x4
Recommended bearing class Edge
Pin Remover Erforderlich
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended knob sizes
21–24 mm25–27 mm30–40 mm
Recommended handle lengths
90–105 mm110–120 mmSingle Handle
Let’s tune your reel
Available variants
5.8 R
5.8 L

Matching tuning parts for your Cardiff

Recommended for your Cardiff
  • STAR PRODUCT  ★ 50+
RL-TNG EDGE Spool Bearing Set with shield: two hybrid ceramic ball bearings RL-TNG EDGE Spool Bearing Set open without shield: two hybrid ceramic ball bearings
  • LEGENDARY  ★ 100+
RL-TNG APEX Spool Bearing Set: two ceramic ball bearings RL-TNG APEX spool bearings with S30 ceramic balls, ABEC 9
  • POPULAR  ★ 20+
RL-TNG CORE Spool Bearing Set: two stainless steel ball bearings RL - Angelrollentuning - RL - TNG Stainless Steel Ball Bearing Set | ABEC 5 | Shimano | 5x11x4 | 3x10x4 - Bundle -
  • LOW STOCK
Two metal ball bearings from the Hedgehog Studio "Kattobi" Tuning Kit Ceramic Ball Bearings for Shimano 1030 & 1030 Air are shown side by side on a plain white background, each with a visible inner ring of balls.
  • LOW STOCK
Two round red wheels with visible metal bearings, resembling the Hedgehog Studio "Kattobi" Tuning Kit ball bearings for Shimano Air BFS 1030 & 1030, against a white background.
  • LOW STOCK
Two ball bearings from the Hedgehog Studio "Kattobi" Tuning Kit (Shimano Air BFS-Si Ceramic 1030 & 1030) are shown side by side with "AIP BFS-SI", "1030AIR BFS-SI" and a Hedgehog Studio banner, perfect for upgrades.

The Shimano Cardiff 300 A is the all-round round reel in the Cardiff series (since 2005) for pike, zander and light saltwater use: one-piece die-cast aluminum body, VBS centrifugal brake, Super Stopper, 4 A-RB ball bearings plus roller bearing, 252 g, 4.5 kg of drag power, 5.8:1 gear ratio, 62 cm line retrieval. Right-handed (300A) and left-handed (301A).

Frequently asked questions about tuning the Shimano 05 Cardiff 300 A

Which spool bearings fit the Shimano 05 Cardiff 300 A?
The Shimano 05 Cardiff 300 A uses spool bearings in 3x10x4 (both spool bearings the same size) (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts. To swap them on this reel you need a Pin Remover, because the bearings are secured to the shaft with pins.
Which bearing class do we recommend for the 05 Cardiff 300 A?
For the Shimano 05 Cardiff 300 A we recommend EDGE, the balanced middle class. A clearly noticeable gain in casting distance and smoothness at a very good price-performance ratio. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 05 Cardiff 300 A?
The handle fitting of the Shimano 05 Cardiff 300 A is 7x4 (wrench size × shaft diameter in mm). Every tuning handle with a 7x4 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Do I need special tools to change the bearings on the 05 Cardiff 300 A?
Yes. On the Shimano 05 Cardiff 300 A the spool bearings are secured to the spool shaft with pins. A Pin Remover lets you pull the pins out cleanly without bending the shaft. Apart from that you only need a suitable screwdriver for the side plate.
Can you install the tuning on my 05 Cardiff 300 A?
Yes. Send us your Shimano 05 Cardiff 300 A, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.