Your shopping cart (0)
Your shopping cart is empty
Taxes are included, shipping costs will be calculated at checkout.
Your shopping cart is empty
Taxes are included, shipping costs will be calculated at checkout.
Shimano:
Daiwa:
Our knobs are compatible with many baitcaster reels from Shimano and Daiwa that have a Type A or Type S knob mount.
In the following list, you will find a selection of common reel models.
Your Reel is not listed? No problem – in the tab "Your Reel is not listed?" we show you how to check yourself if the knobs fit your reel.
Don't worry – if your reel is not on the compatibility list, that doesn't necessarily mean our knobs won't fit. Many manufacturers use the same knob mounts across several model generations.
With a few simple steps, you can check yourself whether our knobs fit your fishing reel.
First, take a closer look at the handle knob of your reel. On most reels, there is a small cap on top of the knob.
This cap can usually be carefully removed:
Under this cap, you will usually find the screw that attaches the knob to the handle.
Now it gets interesting. Under the cap, you will see either:
Riveted knobs are usually found only on very inexpensive reels and generally cannot be easily replaced.
If there is a screw, you can simply loosen it with a small screwdriver. Then the knob can be pulled off the handle.
Now measure the shaft of the handle where the knob sits.
For our knobs, the dimensions should be approximately:
If these dimensions fit, you can usually install our knobs without any problems.
Here you can see exactly where to measure.

The right crank knob (knob) significantly influences the grip feel, control, and comfort while fishing. Depending on the fishing technique, reel size, and personal preference, a different knob may be more suitable.
Knob size is usually specified by the diameter at the thickest point – not by the length. This diameter determines how much contact area your hand has with the knob.
Typical use: BFS, finesse, ultralight baitcasters
Typical use: allround baitcasters, zander, perch, pike
Typical use: pike, larger lures, stronger reels
Typical use: bigbait, large swimbaits, saltwater
Basically, larger knobs can also be mounted on smaller reels as long as the fitting matches. Technically, this is often possible.
However, you should pay attention to choosing a knob size that makes sense for the reel. A very large or heavy knob can significantly accelerate the crank due to its own weight and the resulting centrifugal force, more than some light reels are designed for.
Especially with very light baitcaster reels, BFS reels, or finely built gearboxes, a knob that is too large can increase the load on the mechanism. In the worst case, this can lead to more wear or even damage to the gearbox over time.
Therefore: just because a knob can be mounted does not automatically make it the best choice for the respective setup. For small and light reels, it is advisable to opt for light and appropriately sized knobs.
Here is a quick guide to which size fits which setup:
Ultimately, choosing the right knob is always a matter of personal grip feel. Many anglers prefer larger knobs for more comfort, while smaller knobs offer more direct feedback from the reel.
The Cork Power Knob from Gomexus is 38 mm in diameter and weighs about 15 g.
Cork provides an incredibly good grip and is suitable for all weather conditions. Even when wet, you always maintain full control over your fishing reel.
The natural raw material is very popular among anglers because it fits almost any fishing reel, whether spinning or baitcasting. Combined with a rod that also has cork elements, the entire combo with the cork knobs looks perfectly matched.
The knob fits both baitcasting reels and spinning reels.
For this size of knobs, we recommend larger fishing reels starting from size 3000. However, the knobs can also be easily mounted on smaller reels.
To fit the knobs on as many reels as possible, the package includes different washers. For easy installation, the appropriate tool and instructions are also included.
If you have any questions about installing the knobs, be sure to watch this video:
To ensure the knobs turn smoothly, high-quality stainless steel ball bearings are included. To keep your knobs turning for a long time, we recommend oiling the ball bearings before installation. The best choice for this is a ball bearing oil like the High Spec Bearing Oil from Glitch Oil.
If you are unsure about the size, you can ask us for Advice questions, we are happy to help you with the right choice.
If your Reel is not included, don’t panic. For Reels of different brands, the original crank knob must first be removed and the shaft measured. If the shaft dimensions match the specifications in the graphic, the knob is compatible.

Please note that per package there is each 1x Knob included.