Frequently asked questions about tuning the Shimano 22 Tranx 150 A
Which spool bearings fit the Shimano 22 Tranx 150 A?
The Shimano 22 Tranx 150 A uses spool bearings in 3x10x4 (both spool bearings the same size) (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts.
Which bearing class do we recommend for the 22 Tranx 150 A?
For the Shimano 22 Tranx 150 A we recommend EDGE, the balanced middle class. A clearly noticeable gain in casting distance and smoothness at a very good price-performance ratio. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 22 Tranx 150 A?
The handle fitting of the Shimano 22 Tranx 150 A is 7x4 (wrench size × shaft diameter in mm). Every tuning handle with a 7x4 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Do I need special tools to change the bearings on the 22 Tranx 150 A?
No. On the Shimano 22 Tranx 150 A the spool bearings can be changed without a Pin Remover. A suitable screwdriver for the side plate is enough.
Can you install the tuning on my 22 Tranx 150 A?
Yes. Send us your Shimano 22 Tranx 150 A, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.