Dein Warenkorb (0)
Dein Warenkorb ist leer
Steuern sind enthalten, Versandkosten werden an der Kasse berechnet.
Dein Warenkorb ist leer
Steuern sind enthalten, Versandkosten werden an der Kasse berechnet.
Shimano:
Daiwa:
Our knobs are compatible with many baitcaster reels from Shimano and Daiwa that have a Type A or Type S knob mount.
In the following list, you will find a selection of common reel models.
Your Reel is not listed? No problem – in the tab "Your Reel is not listed?" we show you how to check yourself if the knobs fit your reel.
Don't worry – if your reel is not on the compatibility list, that doesn't necessarily mean our knobs won't fit. Many manufacturers use the same knob mounts across several model generations.
With a few simple steps, you can check yourself whether our knobs fit your fishing reel.
First, take a closer look at the handle knob of your reel. On most reels, there is a small cap on top of the knob.
This cap can usually be carefully removed:
Under this cap, you will usually find the screw that attaches the knob to the handle.
Now it gets interesting. Under the cap, you will see either:
Riveted knobs are usually found only on very inexpensive reels and generally cannot be easily replaced.
If there is a screw, you can simply loosen it with a small screwdriver. Then the knob can be pulled off the handle.
Now measure the shaft of the handle where the knob sits.
For our knobs, the dimensions should be approximately:
If these dimensions fit, you can usually install our knobs without any problems.
Here you can see exactly where to measure.

The right crank knob (knob) significantly influences the grip feel, control, and comfort while fishing. Depending on the fishing technique, reel size, and personal preference, a different knob may be more suitable.
Knob size is usually specified by the diameter at the thickest point – not by the length. This diameter determines how much contact area your hand has with the knob.
Typical use: BFS, finesse, ultralight baitcasters
Typical use: allround baitcasters, zander, perch, pike
Typical use: pike, larger lures, stronger reels
Typical use: bigbait, large swimbaits, saltwater
Basically, larger knobs can also be mounted on smaller reels as long as the fitting matches. Technically, this is often possible.
However, you should pay attention to choosing a knob size that makes sense for the reel. A very large or heavy knob can significantly accelerate the crank due to its own weight and the resulting centrifugal force, more than some light reels are designed for.
Especially with very light baitcaster reels, BFS reels, or finely built gearboxes, a knob that is too large can increase the load on the mechanism. In the worst case, this can lead to more wear or even damage to the gearbox over time.
Therefore: just because a knob can be mounted does not automatically make it the best choice for the respective setup. For small and light reels, it is advisable to opt for light and appropriately sized knobs.
Here is a quick guide to which size fits which setup:
Ultimately, choosing the right knob is always a matter of personal grip feel. Many anglers prefer larger knobs for more comfort, while smaller knobs offer more direct feedback from the reel.
Leicht im Griff. Kraftvoll in der Kurbel.
Die Maktub EVA Knobs bringen das, was echte JDM-Komponenten ausmacht: Perfekte Balance, überragendes Material und maximale Kontrolle, alles in einem kompakten, superleichten Design. Gefertigt aus hochwertigem EVA-Resin in Kombination mit A7075 Extra Super Duralumin, liefert dieser Knob eine unvergleichliche Mischung aus Stabilität, Agilität und Komfort. 🇯🇵
Der 22 mm Knob ist die kompakte Variante, ideal für Finesse-Setups und feines Angeln, wo ein schlankes Griffprofil und schnelle, präzise Kontrolle gefragt sind. Wer es etwas voluminöser mag, findet mit dem Maktub EVA Knob 25 mm die größere Schwester.
Diese Kombination aus Duralumin und EVA sorgt für ein unverwechselbares Kurbelgefühl: leicht in der Bewegung, stark im Drill.
Der Knob ist kompatibel mit Shimano A Type und Daiwa S Type Handles. Da beide Rollentypen in der Regel die gleiche Knob-Aufnahme besitzen, passt er auf viele gängige Handles von Baitcaster- und Stationärrollen.
Kompatible Beispiele:
Einfach austauschen, anschrauben, fertig, kein Spezialwerkzeug nötig.
Wer seinem Knob eine persönliche Note geben will, kombiniert ihn mit den Maktub Knob Accent Inserts. Die kleinen Farbringe klickst du werkzeuglos in das Knob-Ende, erhältlich in Pink, Blau, Lila, Gold und Grün. So passt du den Knob farblich an deine Combo, deine Schnur oder deinen Style an.
Leicht beim Anfassen, kraftvoll beim Kurbeln. EVA-Resin sorgt für sicheren Halt, selbst bei Regen, Schweiß oder Kälte, während der A7075-Duralumin-Schaft extreme Stabilität bietet, ohne zusätzliches Gewicht auf die Rolle zu bringen.
Du profitierst von:
Gefertigt in Japan mit höchster Präzision, CNC-gefräst und perfekt ausbalanciert. Der Maktub EVA Knob ist ein echtes Premium-Upgrade für deine Angelrolle:
Der Maktub EVA Knob bringt echtes JDM-Feeling auf jede Rolle. Ultraleicht, komfortabel, langlebig und mit dem unverwechselbaren „Made in Japan"-Charakter, den man bei jeder Kurbelumdrehung spürt. Egal ob auf deiner Baitcaster oder Stationärrolle, dieser Knob macht dein Setup nicht nur leichter, sondern auch präziser, griffiger und einfach schöner.
Leicht. Stark. Japanisch.