With the "Kattobi" ball bearing tuning kit you get a premium ball bearing set from Japan for your baitcaster reel. The kit includes 2 ball bearings with the bearing size 1030Air (3mm x 10mm x 4mm).
The small ceramic balls are built into the housing with such precision that they start to tarnish even with the slightest weight. As a result, the fishing reel performs incredibly well and has an extremely high speed on the one hand and very quiet running on the other.
Squeeze out the last few feet!
The air ceramic ball bearing set is aimed at anglers with light lures who primarily cast lures from 1 - 28 g. With the ball bearing you achieve an average of 10 - 30% more throw distance. Doesn't sound like much, but with a casting distance of 30 m you get up to 9 m more out of your reel compared to factory ball bearings. This enables you to fish spots that were previously out of your casting range.
Why use tuning bearings?
In general, ball bearings that are installed in the reel from the factory often do not have good rotation properties, as a lot of grease and dust prevent smooth running.
The AIR ceramic tuning kit is oiled at home, the in-house Alchemy Oil by Hedgehog Studio for the perfect balance between oil and ball bearings.
The "Kattobi" bearings undergo quality control, for this they are checked by hand after assembly and only the bearings with excellent rotational performance are allowed to leave the house.
It is therefore not necessary to clean or lubricate the ball bearings. The ball bearings can be used out-of-the-box.
Compatible roles (click me)
- Steez Air TW !!!Attention!!! see below
- 500H, 500HL, 500XXH, 500XXHL
- Steez CT SV TW
- 700H, 700HL, 700XH, 700XHL
- Steez SV TW
- 1012SV-XH, 1012SV-XHL, 1016SV-H, 1016SV-HL, 1016SV-SH, 1016SV-SHL
- Steez LTD SV TN
- Steez LTD SV
- Steez SV
- 20 Zillion10 SV TW
- Zillion TW HLC 1516
- Zillion SV TW
- 1016SV, 1016SV-L, 1016SV-H, 1016SV-HL, 1016SV-SH, 1016SV-SHL, 1016SV-XXH, 1016SV-XXHL
- SS SV
- 103, 103L, 103H, 103HL, 103SH, 103SHL
- SV Light LTD
- 6.3R-TN, 6.3L-TN, 8.1R-TN, 8.1L-TN
For the Steez Air TW, which has a special small-diameter spool, the Cross wrench for the spool shaft pin TYPE R not! Please use the SLP WORKS Spool BB Remover II for this
Please also note:
AIR BFS bearings cannot be used with the following reels due to their special spools:
< span>21 STEEZ LTD SV TW
21 ZILLION SV TW