Your shopping cart (0)
Your shopping cart is empty
Taxes are included, shipping costs will be calculated at checkout.
Your shopping cart is empty
Taxes are included, shipping costs will be calculated at checkout.
Shimano:
Daiwa:
Our knobs are compatible with many baitcaster reels from Shimano and Daiwa that have a Type A or Type S knob mount.
In the following list, you will find a selection of common reel models.
Your Reel is not listed? No problem – in the tab "Your Reel is not listed?" we show you how to check yourself if the knobs fit your reel.
Don't worry – if your reel is not on the compatibility list, that doesn't necessarily mean our knobs won't fit. Many manufacturers use the same knob mounts across several model generations.
With a few simple steps, you can check yourself whether our knobs fit your fishing reel.
First, take a closer look at the handle knob of your reel. On most reels, there is a small cap on top of the knob.
This cap can usually be carefully removed:
Under this cap, you will usually find the screw that attaches the knob to the handle.
Now it gets interesting. Under the cap, you will see either:
Riveted knobs are usually found only on very inexpensive reels and generally cannot be easily replaced.
If there is a screw, you can simply loosen it with a small screwdriver. Then the knob can be pulled off the handle.
Now measure the shaft of the handle where the knob sits.
For our knobs, the dimensions should be approximately:
If these dimensions fit, you can usually install our knobs without any problems.
Here you can see exactly where to measure.

The right crank knob (knob) significantly influences the grip feel, control, and comfort while fishing. Depending on the fishing technique, reel size, and personal preference, a different knob may be more suitable.
Knob size is usually specified by the diameter at the thickest point – not by the length. This diameter determines how much contact area your hand has with the knob.
Typical use: BFS, finesse, ultralight baitcasters
Typical use: allround baitcasters, zander, perch, pike
Typical use: pike, larger lures, stronger reels
Typical use: bigbait, large swimbaits, saltwater
Basically, larger knobs can also be mounted on smaller reels as long as the fitting matches. Technically, this is often possible.
However, you should pay attention to choosing a knob size that makes sense for the reel. A very large or heavy knob can significantly accelerate the crank due to its own weight and the resulting centrifugal force, more than some light reels are designed for.
Especially with very light baitcaster reels, BFS reels, or finely built gearboxes, a knob that is too large can increase the load on the mechanism. In the worst case, this can lead to more wear or even damage to the gearbox over time.
Therefore: just because a knob can be mounted does not automatically make it the best choice for the respective setup. For small and light reels, it is advisable to opt for light and appropriately sized knobs.
Here is a quick guide to which size fits which setup:
Ultimately, choosing the right knob is always a matter of personal grip feel. Many anglers prefer larger knobs for more comfort, while smaller knobs offer more direct feedback from the reel.
Like a jaguar silently stalking through the jungle, the JGR Knob is designed for pure precision and control. Its slim, elegant design with only 19 mm diameter makes it the perfect upgrade for anyone who wants to make their fishing reel lighter, faster, and grippier.
While many EVA knobs are bulky and massive, the JGR focuses on optimal ergonomics:
✅ Slim shape for precise handling
✅ Specially shaped grip areas for thumb & finger
✅ Pleasant feel – not too soft, not too hard
Whether baitcaster or spinning reel – with this EVA crank knob you have maximum control, whether fishing spinning, baitcasting, or finesse fishing.
Most knobs rely on mass, but the JGR takes a different path: slim, light, and agile, but with clever grip zones exactly where you need them.
✔ Textured EVA material for secure hold – even with wet hands
✔ Thumb & finger recess for a natural, grippy feel
✔ No slippery plastic look – but a high-quality, professional finish
Especially when precise jigging, finesse fishing, or fast baitcast casts, you feel the difference: Every grip fits, every movement feels direct & controlled.
The JGR Knob is compatible with all common baitcaster and spinning reels that have a Shimano Type A or Daiwa Type S shaft.
🚀 Perfect for fishing reels from Shimano, Daiwa, Lew’s, Okuma, 13 Fishing & many more!
No complicated retrofitting – just unscrew old knobs, mount new ones & start fishing right away.
Whether simple or eye-catching – the JGR Knob is available in various colors, with a mix of matte and glossy elements. This way you can perfectly customize your fishing reel and create a uniform, clean setup.
🎨 Your style, your color – matched to your fishing setup!
The JGR Knob is delivered without bearings, so you can continue using the original bearings from your old knob. If you want even better running properties, we recommend our in-house knob bearings, which you can find here:
This makes your knob spin even easier, smoother, and more durable – for the ultimate fishing reel tuning.
A slim, elegant knob deserves the matching handle! Combine the JGR Knob with our color-matched carbon handles and take your reel to a new level visually & technically. Matching locknuts and plates ensure a perfectly coordinated setup.
🚀 Performance & style in perfection!
📌 Length: 40 mm
📌 Diameter: 19 mm
📌 Material: specially developed, durable EVA
📌 Compatibility: Shimano Type A & Daiwa Type S (fits many fishing reels!)
📌 Bearings: Not included – use your old ones or our high-performance knob bearings available here
Whether precise jigging, fast baitcasting, or light spinning fishing – the JGR Knob gives you the perfect feeling for maximum control and precision.
🔥 For everyone who doesn’t just fish, but hunts with the highest precision!
🎣 Act now – before it runs away from you! 😜