Revo5 Rocket
Abu Garcia2023

Abu Garcia Revo5 Rocket Tuning

Tuning Specs
Handle bore 8x5
Spool bearing sizes 5x11x4 | 3x10x4
Recommended bearing class Apex
Pin Remover Erforderlich
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended handle lengths
70–85 mm90–105 mm110–120 mm
Let’s tune your reel
Available variants
10.1 R
10.1 L
Knob mounting
Abu Garcia uses a different knob mounting system - tuning knobs from our range usually do not fit. Solution: replace the complete handle. The handle mounting is listed above under Handle bore.

Matching tuning parts for your Revo

There are currently no compatible tuning parts listed for this reel.

The Abu Garcia Revo5 Rocket is the high-speed version of the 5th generation with a 10.1:1 gear ratio — the fastest standard baitcaster in the Revo lineup. Aluminum frame, IVCB brake, D2 gear design, carbon matrix drag. For fast lure pickups, spinnerbaits, and topwater.

Frequently asked questions about tuning the Abu Garcia Revo5 Rocket

Which spool bearings fit the Abu Garcia Revo5 Rocket?
The Abu Garcia Revo5 Rocket uses spool bearings in 5x11x4 and 3x10x4 (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts. To swap them on this reel you need a Pin Remover, because the bearings are secured to the shaft with pins.
Which bearing class do we recommend for the Revo5 Rocket?
For the Abu Garcia Revo5 Rocket we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the Revo5 Rocket?
The handle fitting of the Abu Garcia Revo5 Rocket is 8x5 (wrench size × shaft diameter in mm). Every tuning handle with a 8x5 fitting fits directly. Abu Garcia uses its own knob fitting, so tuning knobs usually don't fit the stock handle. The solution is a complete tuning handle with matching knobs.
Do I need special tools to change the bearings on the Revo5 Rocket?
Yes. On the Abu Garcia Revo5 Rocket the spool bearings are secured to the spool shaft with pins. A Pin Remover lets you pull the pins out cleanly without bending the shaft. Apart from that you only need a suitable screwdriver for the side plate.
Can you install the tuning on my Revo5 Rocket?
Yes. Send us your Abu Garcia Revo5 Rocket, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.