23 Metanium
Shimano2023

Shimano 23 Metanium Tuning

Tuning Specs
Handle bore 7x4
Spool bearing sizes 5x11x4 | 3x10x4
Recommended bearing class Apex
Pin Remover Erforderlich
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended knob sizes
18–20 mm21–24 mm25–27 mm
Recommended handle lengths
70–85 mm90–105 mm
Let’s tune your reel
Available variants
100 HG
101 HG
100 XG
101 XG

Matching tuning parts for your Metanium

There are currently no compatible tuning parts listed for this reel.

The Shimano 23 Metanium is the second generation of the 20 Metanium platform with a one-piece magnesium body and lightweight MagnumLite spool. Released only in HG (7.1:1) and XG (8.1:1), each available in right- and left-hand retrieve.

Frequently asked questions about tuning the Shimano 23 Metanium

Which spool bearings fit the Shimano 23 Metanium?
The Shimano 23 Metanium uses spool bearings in 5x11x4 and 3x10x4 (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts. To swap them on this reel you need a Pin Remover, because the bearings are secured to the shaft with pins.
Which bearing class do we recommend for the 23 Metanium?
For the Shimano 23 Metanium we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 23 Metanium?
The handle fitting of the Shimano 23 Metanium is 7x4 (wrench size × shaft diameter in mm). Every tuning handle with a 7x4 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Do I need special tools to change the bearings on the 23 Metanium?
Yes. On the Shimano 23 Metanium the spool bearings are secured to the spool shaft with pins. A Pin Remover lets you pull the pins out cleanly without bending the shaft. Apart from that you only need a suitable screwdriver for the side plate.
Can you install the tuning on my 23 Metanium?
Yes. Send us your Shimano 23 Metanium, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.