21 Steez Limited SV TW 1000
Daiwa2021

Daiwa 21 Steez Limited SV TW 1000 Tuning

Tuning Specs
Handle bore 8x5
Spool bearing sizes 3x10x4 | 3x10x4
Recommended bearing class Apex
Pin Remover Erforderlich
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended knob sizes
18–20 mm21–24 mm25–27 mm
Recommended handle lengths
70–85 mm90–105 mm
Let’s tune your reel
Available variants
1000
1000 L
1000 H
1000 HL
1000 S-XH
1000 S-XHL

Matching tuning parts for your Steez

There are currently no compatible tuning parts listed for this reel.

The Daiwa 21 Steez Limited SV TW 1000 is the 2021 limited edition with a magnesium body, HyperDrive design, T-Wing system, and 34mm SV spool for premium bass fishing. Available in Normal (6.3:1), H (7.1:1), and Shallow-Spool XH (8.5:1), each in right- and left-handed versions.

Frequently asked questions about tuning the Daiwa 21 Steez Limited SV TW 1000

Which spool bearings fit the Daiwa 21 Steez Limited SV TW 1000?
The Daiwa 21 Steez Limited SV TW 1000 uses spool bearings in 3x10x4 (both spool bearings the same size) (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts. To swap them on this reel you need a Pin Remover, because the bearings are secured to the shaft with pins.
Which bearing class do we recommend for the 21 Steez Limited SV TW 1000?
For the Daiwa 21 Steez Limited SV TW 1000 we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 21 Steez Limited SV TW 1000?
The handle fitting of the Daiwa 21 Steez Limited SV TW 1000 is 8x5 (wrench size × shaft diameter in mm). Every tuning handle with a 8x5 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Do I need special tools to change the bearings on the 21 Steez Limited SV TW 1000?
Yes. On the Daiwa 21 Steez Limited SV TW 1000 the spool bearings are secured to the spool shaft with pins. A Pin Remover lets you pull the pins out cleanly without bending the shaft. Apart from that you only need a suitable screwdriver for the side plate.
Can you install the tuning on my 21 Steez Limited SV TW 1000?
Yes. Send us your Daiwa 21 Steez Limited SV TW 1000, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.