19 Antares
Shimano2019

Shimano 19 Antares Tuning

Tuning Specs
Handle bore 7x4
Spool bearing sizes 5x11x4 | 3x10x4
Recommended bearing class Apex
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended knob sizes
21–24 mm25–27 mm30–40 mm
Recommended handle lengths
90–105 mm110–120 mm
Let’s tune your reel
Available variants
6.2 R
6.2 L
HG R
HG L

Matching tuning parts for your Antares

There are currently no compatible tuning parts listed for this reel.

Frequently asked questions about tuning the Shimano 19 Antares

Which spool bearings fit the Shimano 19 Antares?
The Shimano 19 Antares uses spool bearings in 5x11x4 and 3x10x4 (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts.
Which bearing class do we recommend for the 19 Antares?
For the Shimano 19 Antares we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 19 Antares?
The handle fitting of the Shimano 19 Antares is 7x4 (wrench size × shaft diameter in mm). Every tuning handle with a 7x4 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Can you install the tuning on my 19 Antares?
Yes. Send us your Shimano 19 Antares, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.