16 Aldebaran BFS
Shimano2016

Shimano 16 Aldebaran BFS Tuning

Tuning Specs
Handle bore 7x4
Spool bearing sizes 3x7x3 | 3x7x3
Recommended bearing class Apex
Pin Remover Erforderlich
These sizes are precisely tailored to the reel — we’ve deliberately hidden the others so you can find the right tuning parts straight away.
Recommended knob sizes
18–20 mm21–24 mm
Recommended handle lengths
70–85 mm90–105 mm
Let’s tune your reel
Available variants
XG R
XG L
R
L

Matching tuning parts for your Aldebaran

There are currently no compatible tuning parts listed for this reel.

The Shimano 16 Aldebaran BFS (2016) is the specialized bait-finesse baitcaster with an ultra-light Spool and FTB magnetic brake for ultra-light lures from 1 g. First BFS Aldebaran with modern MGL design.

Frequently asked questions about tuning the Shimano 16 Aldebaran BFS

Which spool bearings fit the Shimano 16 Aldebaran BFS?
The Shimano 16 Aldebaran BFS uses spool bearings in 3x7x3 (both spool bearings the same size) (inner × outer × width in mm). You'll find matching tuning spool bearings in exactly this size on this page under the tuning parts. To swap them on this reel you need a Pin Remover, because the bearings are secured to the shaft with pins.
Which bearing class do we recommend for the 16 Aldebaran BFS?
For the Shimano 16 Aldebaran BFS we recommend APEX, our highest tuning level. It gets the maximum casting distance and smoothness out of the reel and is especially worth it if you cast light lures or want every last bit of performance. The recommendation is based on how this reel is typically used.
Which handle and knobs fit the 16 Aldebaran BFS?
The handle fitting of the Shimano 16 Aldebaran BFS is 7x4 (wrench size × shaft diameter in mm). Every tuning handle with a 7x4 fitting fits directly. Tuning knobs in the sizes shown on this page fit the stock handle and our tuning handles.
Do I need special tools to change the bearings on the 16 Aldebaran BFS?
Yes. On the Shimano 16 Aldebaran BFS the spool bearings are secured to the spool shaft with pins. A Pin Remover lets you pull the pins out cleanly without bending the shaft. Apart from that you only need a suitable screwdriver for the side plate.
Can you install the tuning on my 16 Aldebaran BFS?
Yes. Send us your Shimano 16 Aldebaran BFS, we'll install the tuning parts professionally, clean and oil the reel and send it back ready to fish. You'll find the tuning service via the button above.