Your shopping cart (0)
Your shopping cart is empty
Taxes are included, shipping costs will be calculated at checkout.
Your shopping cart is empty
Taxes are included, shipping costs will be calculated at checkout.
Shimano:
Daiwa:
Our knobs are compatible with many baitcasting reels from Shimano and Daiwa that have a Type A or Type S knob mount.
In the following list, you’ll find a selection of common reel models.
Your reel isn’t listed? No problem – in the tab "Your reel isn’t listed?" we show you how to check if the knobs fit your reel.
Don’t worry – if your reel is not on the compatibility list, that doesn’t necessarily mean our knobs won’t fit. Many manufacturers use the same knob mounts across several model generations.
With a few simple steps, you can check yourself whether our knobs fit your fishing reel.
First, take a closer look at the handle knob of your reel. On most reels, there is a small cap on top of the knob.
This cap can usually be carefully removed:
Under this cap, you will usually find the screw that attaches the knob to the handle.
Now it gets interesting. Under the cap, you will see either:
Riveted knobs are usually found only on very inexpensive reels and generally cannot be easily replaced.
If there is a screw, you can simply loosen it with a small screwdriver. Then the knob can be pulled off the handle.
Now measure the shaft of the handle where the knob sits.
For our knobs, the dimensions should be approximately:
If these dimensions fit, you can usually install our knobs without any problems.
Here you can see exactly where to measure.

The right crank knob (Knob) significantly influences the grip feel, control, and comfort while fishing. Depending on the fishing technique, reel size, and personal preference, a different knob may be more suitable.
Knob sizes are usually specified by the diameter at the thickest point – not by the length. This diameter determines how much contact area your hand has with the knob.
Typical use: BFS, finesse, ultralight baitcasters
Typical use: allround baitcasters, zander, perch, pike
Typical use: pike, larger lures, stronger reels
Typical use: bigbait, large swimbaits, saltwater
Basically, larger knobs can also be mounted on smaller reels as long as the fitting matches. Technically, this is often possible.
However, you should choose the knob size sensibly for the reel. A very large or heavy knob can accelerate the crank significantly more due to its own weight and the resulting centrifugal force than some lightweight reels are designed for.
Especially with very light baitcasting reels, BFS reels, or finely built gearboxes, a knob that is too large can increase the load on the mechanics. In the worst case, this can lead to more wear or even damage to the gearbox over time.
Therefore: just because a knob can be mounted does not automatically make it the best choice for the respective setup. For small and light reels, it is advisable to opt for lightweight and appropriately sized knobs.
Here is a quick guide to which size fits which setup:
Ultimately, choosing the right knob is always a matter of personal grip feel. Many anglers prefer larger knobs for more comfort, while smaller knobs offer more direct feedback from the reel.
The Maktub EVA Knobs bring what true JDM components stand for:
Perfect balance, outstanding material, and maximum control – all in a compact, super-light design.
Made from high-quality EVA resin combined with A7075 Extra Super Duralumin, these knobs deliver an unmatched blend of stability, agility, and comfort. 🇯🇵
And the best part:
The set includes two EVA knobs, perfectly suited for direct replacement or upgrading your reel, whether baitcasting or spinning reel.
Spacer Shaft: A7075 Extra Super Duralumin (CNC-milled)
Grip: EVA resin – ultra-light, non-slip & vibration-dampening
Length: 49.5 mm
Max. grip diameter: Φ25 mm
This combination of duralumin and EVA ensures a distinctive reel handle feel:
light in movement, strong in the fight – exactly what you need when going after the big predators.
Whether you fish a Shimano or Daiwa –
the Maktub EVA Knobs fit many common handles of baitcasting and spinning reels,
as both reel types usually have the same knob mount.
This way you can individually upgrade your tackle –
from the compact baitcasting setup to the fine spinning reel.
Compatible examples:
Maktub handles
Shimano handles (e.g. Metanium, Vanquish, Stradic)
Daiwa handles (e.g. Zillion, Steez, Exist, Ballistic)
Simply swap, screw on, done – no special tools needed.
Light to the touch, powerful when cranking.
That is the principle behind the Maktub EVA Knobs.
EVA resin ensures a secure hold – even in rain, sweat, or cold –
while the A7075 duralumin shaft offers extreme stability,
without adding extra weight to the reel.
You benefit from:
Better control when guiding and reeling in
Reduced fatigue during long fishing sessions
Faster response thanks to low inertia
Made in Japan with the highest precision, CNC-milled and perfectly balanced –
the Maktub EVA Knobs are a genuine premium upgrade for your fishing reel.
High-quality materials (A7075 duralumin & EVA resin)
CNC-milled perfection
Noble, functional design
Developed for maximum durability and performance
The Maktub EVA Knobs (2-piece set) bring true JDM feeling to every reel.
Ultra-light, comfortable, durable – and with the unmistakable
“Made in Japan” character you feel with every turn of the reel handle.
Whether you use them on your baitcasting or spinning reel, these knobs make your setup not only lighter,
but also more precise, grippier, and simply more beautiful.
Light. Strong. Japanese.